Universal Milling Machine

Base: The Base of Heavy Rigid Casting Serving also as Coolant Tank. It Provides a suitable platform for Robust Operation Column: The Column is again of Rigid Built. Traces are Hand Scraped and Lapped/ Ground. Knee: The Heavy Knee is made as a Box and Rests on a Vertical Column Equipped with Thrust Bearing and Protected from Dirt and Chips by Telescopic Covers. The Moveable Parts inside are Protected foreign matter and Coolant, The Knee being closed at the Upper End. All the Hand Wheels are Relatable. The Automatic Feeds in all three Directions are limited by means of Adjustable Feed Trip. Table: The Work Table is of a very Sturdy Construction and the Dovetail is Provided with an Adjustable gib. The Table has 3 T-Slots and is Provided with Coolant Channels. In the Construction of the Milling Machine Special Importance is Attached to Sturdy Construction of the Base of the Table. A Graduated Scale is Placed in order to obtain an Exact Angle Adjustment up to 45 at either Side. The Working Pressure of the Table Lead Screw is taken up though Pressure Thrust Bearings. Power Drive: The though an Electric Motor Flange Mounted at the Rear of the Machine. Clutch Levers are Placed within Reach on Both Side of the Column. The Driving Shafts and Spindle Shaft are bedded in Roller and Ball Bearing Respectively. Over Arm: The Exceptionally (Rectangular) Over Arm gives the Milling Arbor a Very Rigid Support. The Over Arm Slides Horizontally in the Dovetail Guide in Column and Can be Clamped against the Solid Location Side of Column. The Arbor Support Fixed in the Over Arm is Moveable and Can be Adjusted and Fixed in any Position. The Heavy Pair of Braces Securely Hold the Arbor and the Over Arm together thus ensuring Accuracy even under the Heaviest Cut. Universal Milling Machine