Two Side Planner Machine

Design: It is a Very Double Rigid Column and Planner Fitted with Ball Bearing. The Bed: The Bed if of Deep Box Section Type and is Tied Together at Frequent Intervals by Double Walled Bridge Pieces Extended to the Bottom of the Bed. The Table: It is of Box Section Type and is Streamlined with Hand Scrapped 'V' way to Bear Heavy Load. It Is Heavily Ribbed and the Rack Provided in it is Accurately Machines and Milling Cut. The Bearings: The Main Bearings for the Gearing are Cast Solid with the Bed. The Gears Teeth are Hobbing Machine cut Except Two Gears which are Helical. Gun Metal Bearings have been Provided for all the Shaft and Loose Pulleys. Taper Roller Bearings can also be Provided Instead of Gun Metal Bushes. The Cross Rail: This is of Box Section Type with Large Surface. It is Suitable for Both Hand and Mechanical Drive. Tool Post: These are Manufactured out of Close Grain Alloy Casting and Steel to Stand Heavy Cut. These Can be Driven Both Manually and Mechanically. The Uprights: The Uprights are of Rigid Box Section Type. Keyed Firmly, Bolted on to the Bed and are Capable of Absorbing the Heaviest Shocks Without Vibration, Extra Pins are Provided to Re-Fit the Machine Accurately after Once it Dismantled. The Drive: The Machine is Arranged for Direct Individual as well as Two Belt Drive.